-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for External RCG is illegal
-2396 Device ID for External RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
5816 209 Instl Clear Releases the machine from its embedded RCG setup.
5816 250 Comm Log Print Prints the communication log.
Note: The proxy number, user name, and password comprise proprietary customer information required
by the service technician to do the necessary settings for Cumin-N. To prevent unauthorized access this
information, these SP settings do not appear in the SMC report.
5821 Remote Service A(ddress)
5821 1 CSS-PI Device Co(de)
Sets the PI device code. After changing this setting, you
must switch the machine off and on.
5821 2 RCG IP Address
Sets the IP address of the RCG (Remote Communication
Gate) destination for call processing at the remote
service center.
[00000000h to FFFFFFFFh/00000000h/
5823
Paper Supply for DFU
An @Remote setting. Not required for service technician.
5824
NVRAMUpload
Uploads the UP and SP mode data (except for counters and the serial number) from
NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents a software
module accessing the NVRAM during the upload.
5825
NVRAMDownload
5. Service Tables
108
To Next Page
Loading...
