8387 O:2-2-01
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted as
2.
• When several documents are merged for a print job, the number of pages stored are counted for the
application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following pages
are not counted as printed pages:
• Blank pages in a duplex printing job.
• Reports printed to confirm counts.
• All reports done in the service mode (service summaries, engine maintenance reports, etc.)
• Test prints for machine image adjustment.
• Error notification reports.
• Partially printed pages as the result of a jam.
8391
T:2-2-02 Large Size Pages Printed
These SPs count pages printed on paper sizes A3/DLT and larger.
[0 to 9999999/0/1]
8411
T:2-2-04 Total Duplex Pages Printed
This SP counts the amount of paper (front/back counted as 1 page) used for duplex
printing. Last pages printed only on one side are not counted.
[0 to 9999999/0/1]
8421
T:2-2-05 Total Simplex/Duplex Pages
These SPs count by binding and combine, and n-Up settings the number of pages
processed for printing. This is the total for all applications.
[0 to 9999999/0/1]
8424
P: 2-2-05 Total Simplex/Duplex Pages
These SPs count by binding and combine, and n-Up settings the number of pages
processed for printing by the printer application.
[0 to 9999999/0/1]
8427
O: 2-2-05 Total Simplex/Duplex Pages
Printer Engine Service Mode
137
To Next Page
Loading...
