3. Remove the SD card slot cover.
4. Insert the SD card into Slot 2.
5. Turn on the main power switch.
6. Enter the SP mode and do SP5825 (NVRAM Download).
7. Push [#Enter].
<NVRAM Download>
execute?
8. Push [#Enter].
You will see "Processing". Then when you see "result=OK", the NVRAM data has been downloaded
successfully.
• The machine cannot do the download if the file name SD card name is different from the printer
serial number.
9. Exit the SP mode.
10. Turn off the main power switch.
11. Remove the SD card.
12. Turn on the main power switch.
5. Service Tables
150
To Next Page
