For more details about this SC 833, SC834 error, execute SP5990 to print an SMC report so you can
read the error code. The error code is not displayed on the operation panel. The additional error codes
(0F30, 0F31, etc. are listed in the SMC report.
829 B
Self-diagnostic Error: Optional RAM
• Replace the optional memory board
• Controller board defective
The optional RAM returned an error during
the self-diagnostic test.
838 D
Self-diagnostic Error: Clock Generator
• Replace the controller board
A verify error occurred when setting data
was read from the clock generator via the
I2C bus.
851 B
IEEE 1394 I/F error
Driver setting incorrect and cannot be
used by the 1394 I/F.
• NIB (PHY), LINK module defective;
change the Interface Board
• Controller board defective
853 B
Wireless LAN Error 1
During machine start-up, the machine can get
access to the board that holds the wireless LAN,
but not to the wireless LAN card (802.11b or
Bluetooth).
• Wireless LAN card missing (was
removed)
854 B
Wireless LAN Error 2
During machine operation, the
machine can get access to the board
that holds the wireless LAN, but not to
the wireless LAN card (802.11b or
Bluetooth).
• Wireless LAN card missing (was removed)
855 B
Wireless LAN error 3
An error was detected on the wireless
LAN card (802.11b or Bluetooth).
• Wireless LAN card defective
• Wireless LAN card connection incorrect
Service Call Conditions
63
To Next Page
Loading...
