1002 002 2nd Tray
1002 003 3rd Tray
1002 004 Bypass Tray
1002 005 Duplex
1003
Regist sag Registration Buckle Adjustment
Adjusts the relay clutch timing at registration. Relay clutch timing determines the amount
of paper buckle at registration. (A "+" setting causes more buckling.)
1003 001 Cassette [–8 mm to+8 mm/0/2 mm step]
1003 002 Multi Tray [–8 mm to+8 mm/0/2 mm step]
1003 003 Duplex Tray [–8 mm to+8 mm/0/2 mm step]
1104
Fusing control Normal, Phase control
Use phase control if the room lights flicker when the fusing lamp starts.
Off: Normal
On: Phase Control
Defaults: NA Off (Normal), EU On (Phase Control)
1105
Fusing Temp DFU
Adjusts the fusing temperatures for printing and standby mode.
1105 001 Fusing Temp
Adjusts the fusing temperature for printing on normal paper.
[150 to 195/180/5 deg.]
1105 002 Fusing T Stand
Adjusts the fusing temperature for standby mode.
[140 to 185/168/1 deg.]
1106 Fusing T Disp(lay)
Displays the current fusing temperature.
1902
OHP Clutch Rt OHP Clutch Rotations
5. Service Tables
88
To Next Page
Loading...
