5801 011 NCS
Initializes the system defaults and interface settings (IP
addresses also), the SmartNetMonitor for Admin settings,
WebStatusMonitor settings, and the TELNET settings.
(NCS: Network Control Service)
5801 014 DCS Setting Initializes the DCS (Delivery Control Service) settings.
5801 015 Clr UCS Setting Initializes the UCS (User Information Control Service) settings.
5801 016 MIRS Setting
Initializes the MIRS (Machine Information Report Service)
settings.
5801 017 CCS
Initializes the CCS (Certification and Charge-control Service)
settings.
5801 018 SRM Initializes information in non-volatile RAM.
5801 019 LCS Setting Initializes information in non-volatile RAM.
5802
Free Run
The machine performs a free run.
Press [#Enter] to start.
Press [#Enter] to stop.
Please note that the machine will not stop immediately after the [#Enter] key is pressed.
5803
Input check
Displays signals received from sensors and switches.
SP Modes other than those listed in this table, are not used in the machine.
Operation Panel Component Name
5803 001 Cover Info Cover sensors
5803 002 Main Moter CLK Main Motor Lock
5803 003 PollyMoter CLK Polygon Motor Lock
5803 004 Fan High Exhaust fan
5803 005 Fan Lock Exhaust fan
5803 006 PSU Fan Lock PSU fan
Printer Engine Service Mode
97
To Next Page
Loading...
