• Finisher SR5000
10 Z-folded sheets, 9 Z-folded sheets and 0 to 10 unfolded sheets, 8 Z-folded sheets and
0 to 20 unfolded sheets, 7 Z-folded sheets and 0 to 30 unfolded sheets, 6 Z-folded sheets
and 0 to 40 unfolded sheets, 5 Z-folded sheets and 0 to 40 unfolded sheets, 4 Z-folded
sheets and 0 to 60 unfolded sheets, 3 Z-folded sheets and 0 to 70 unfolded sheets, 2 Z-
folded sheets and 0 to 80 unfolded sheets, 1 Z-folded sheets and 0 to 90 unfolded sheets
• When using this function with 1 Sided 2 Sided and Mixed Sizes modes, always ensure that
the originals of each size are in even numbers. If you have an odd number of originals, insert
blank sheets to adjust the total.
• Depending on the Z-fold settings, you may not be able to use Rotate Sort.
• Even if you have selected Face Up for Copy Eject Face Method in Glass Mode in User Tools,
the copies will be delivered face down.
• You cannot specify Punch with Z-fold.
Size Magnification
• If the calculated ratio is over the maximum or under the minimum ratio, it is automatically adjusted
to within available range. However, with some ratios, parts of the image might not be copied
or margins will appear on copies.
• The machine selects reproduction ratios of between 25-400%.
Directional Size Magnification
• The reproduction ratios you can specify are 25-400%.
• When entering a percentage ratio, you can specify any value in the permitted range, regardless
of original or copy paper size. However, depending on settings and other conditions, part of
the image may not be copied, or margins will appear on copies.
• When entering a size in mm (inch), if the calculated ratio is over the maximum or under the
minimum ratio, it is automatically adjusted to within available range. However, with some ratios,
parts of the image might not be copied or margins will appear on copies.
Background Numbering
• The numbers appear to overlap the copied image in some cases.
Preset Stamp
• Depending on paper size, if you change the stamp size, parts of the stamp might not be printed.
Supplementary Information
257
To Next Page
Loading...
