User Tools Menu (Copier/Document Server
Features)
This section describes items that can be specified on the Copier/Document Server Features screen. The
Copier/Document Server Features screen can be displayed by pressing the [User Tools/Counter] key. For
details about how to set up these items, see General Settings Guide.
General Features
Item Description
Auto Image Density
Priority
You can set whether Auto Image Density is “On” or “Off” when the
machine is turned on, reset, or modes are cleared.
Original Type Priority You can select the original type effective when the power is turned on,
or modes cleared.
Original Photo Type
Priority
When you select “Text / Photo” or “Photo” in “Original Type Priority”,
you can change the settings of the selected original type.
Original Type Display You can have the original types shown on the initial display.
Paper Display Choose to have the available paper trays and sizes shown on the initial
display.
Original Orientation in
Duplex Mode
Set the original orientation when making two-sided copies.
Copy Orientation in
Duplex Mode
Set the copy orientation when making two-sided copies.
Max. Copy Quantity The maximum copy quantity can be set between 1 and 9999.
Auto Tray Switching If you load paper of the same size in two or more trays, the machine
automatically shifts to the other when the first tray runs out of paper
(when Auto Paper Select is selected.) This function is called “Auto Tray
Switching”. This setting specifies whether to use Auto Tray Switching
or not.
Alert Sound: Original Left
on Exposure Glass
The beeper (key tone) sounds if you forget to remove originals after
copying.
Job End Call Choose whether or not the beeper sounds when copying is complete.
Connect Copy Key
Display
Specify whether or not to display the key for Connect Copy.
7. Appendix
262
To Next Page
Loading...
