• Before using this function, specify the paper thickness under Paper Type: Bypass Tray in User Tools.
For details, see “System Settings”, General Settings Guide.
1. Open the bypass tray, and then insert the envelopes with the side you want to copy face-
up until the beeper sounds.
2. Align the paper guides to the envelope side.
3. Press [Bypass], and then press the [ ] key.
4. Press [Custom Size].
5. Specify the envelope size, and then press [OK].
6. Place the originals, and then press the [Start] key.
• When placing an original on the exposure glass, place the original with the bottom line aligned to
the left scale.
• When placing an original in the ADF, place the original with the bottom line inserted in the ADF.
• When inserting envelopes, be sure to unfold the flaps and position them opposite to the paper feed
direction.
• Load envelopes (162 × 229 mm (C5)) flap down, flap fold against the side guide.
Copying from the Bypass Tray
57
To Next Page
Loading...
