3. Place the originals, and then press the [Start] key.
• You can specify the fold-back position in 1 mm (0.1 inch) increments under Z-fold Position in User
Tools. For details about Z-fold Position, see “System Settings”, General Settings Guide.
• For details about the standard paper sizes that can be Z-folded, and the number of Z-folded copies
that can be stacked on each tray, see “Supplementary Information”.
• p.248 "Supplementary Information"
Using the Z-fold support tray
When using the Z-fold function together with the Staple function, attach the Z-fold support tray to the tray
of Finisher SR4020 or SR5000.
Finisher SR5000
• Shift tray
Fit the hooks of the Z-fold support tray into the holes in the shift tray.
Finisher SR4020
• Upper tray
Fit the hooks of the Z-fold support tray into the dents in the upper tray.
Finishing
93
To Next Page
Loading...
