1. Indicator (green)
Lights whenever the machine is properly connected to the network.
2. Indicator (yellow)
Lights whenever the machine is sending or receiving data via the network.
5. Close the port cover.
Network settings for ethernet and wireless LAN
Make the following network settings according to the network interface you are using.
The following table shows the settings that can be specified and their default factory values. These items
appear in the [Network Setup] menu.
Setting Name Value
IPv4 DNS ServerAddress 1 and 2 : 0.0.0.0
IPv4 DDNS On
DHCP On
IPv4 Address 11.22.33.44
Connecting the Computer and Installing the Software (Network Connection)
57
To Next Page
Loading...
