System Settings
Tray Paper Settings
Paper Size
Specifies the paper size.
Default:
(mainly Europe and Asia)
[A4]
(mainly North America)
[LT (8
1
/
2
× 11)]
• A4, B5 JIS, A5, B6 JIS, A6, LG ( 8 1/2 x14), LT (8 1/2 x 11), HLT (5 1/2 x 8 1/2),
EXE (7 1/4x10 1/2), 16K (197x273mm), 16K (195x270mm), 16K (184x260mm),
F/GL (8 x 13), Foolscap (8 1/2 x 13), Folio (8 1/4 x 13), Custom
Paper Type
Specifies the paper type.
Default: [Plain Paper]
• Plain Paper, Recycled Paper, Thin Paper, Thick Paper
Adjust Sound Volume
Specifies the volume of the sounds produced by the machine.
Select the setting for each item from [Off], [Low], [Middle], or [High].
Panel Key Sound
Specifies the volume of the beep sound when a key is pressed.
Default: [Middle]
Alarm Volume
Specifies the volume of the alarm sound when an operation error occurs.
Default: [Middle]
On Hook Mode
Specifies the volume of the sound from the speaker during On Hook mode.
Default: [Middle]
Copy Job End Tone
Specifies the volume of the beep sound when a copy job is complete.
Default: [Off]
Copy Job Error Tone
Specifies the volume of the beep sound when a copy job error occurs.
7. Configuring the Machine Using the Control Panel
106
To Next Page
Loading...
