Ricoh SP 112SF - Basic Operation for Sending a Fax

1. Press the [User Tools] key.
CXP101
2. Press the [ ] or [ ] key to select [Fax Features], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [TX Settings], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Immediate TX], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Off], [On], or [Next Fax Only], and then press the [OK]
key.
For Memory Transmission, select [Off].
For Immediate Transmission, select [On] or [Next Fax Only].
6. Press the [ ] key to return to the initial screen.
Basic Operation for Sending a Fax
1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
CXP104
2. Place the original on the exposure glass or in the ADF.
6. Sending and Receiving a Fax
76