2. Select a destination using the number keys, and then press the [OK] key.
To add a manually-specified destination
1. Enter the destination fax number using the number keys.
5. If you hear a high pitched tone, press the [Start] key.
If [Fax Mode] is set to [Easy Mode], Step 6 does not apply.
6. If the original is placed on the exposure glass, press the [1] key (1: TX).
Sending a fax after a conversation
An external telephone allows you to send a fax after finishing your conversation, without having to
disconnect and redial. This function is useful when you want to ensure that the fax will be received.
• The procedure differs depending on whether [Fax Mode] is set to [Easy Mode] or [Advanced
Mode] in [TX Settings] in [Fax Features].
• To send faxes using the exposure glass, be sure to first remove any originals loaded in the ADF.
1. Place the original on the exposure glass or in the ADF.
If [Fax Mode] is set to [Easy Mode], you cannot send faxes using the exposure glass.
2. Pick up the handset of the external telephone.
Sending a Fax
83
To Next Page
Loading...
