App. 1-1
Confidential
APPENDIX 1 DELETING USER SETTING
INFORMATION
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
(1) Press the [▲] or [▼] to display “Initial Setup” on the LCD, and press the [OK].
(2) Press the [▲] and [Back] simultaneously. “Reset” is displayed on the LCD.
(3) Press the [OK]. “Machine Reset” is displayed on the LCD.
(4) Press the [OK]. “▼Reset ▲Exit” is displayed on the LCD, and press the [▼].
(5) “Reboot OK?▼Yes ▲No” is displayed on the LCD.
(6) Press the [▼] to delete the user setting information and return the machine to the
ready state.
To Next Page
Loading...
