Ricoh SP 4510 DN User Manual

Message Cause Solution
"Insufficient Memory" A memory allocation error
occurred.
PCL 5/PostScript 3
Select a lower resolution
on the printer driver. For
details about how to
change the resolution
setting, see the printer
driver Help.
PCL 6
Select a lower resolution
on the printer driver. For
details about how to
change the resolution
setting, see the printer
driver Help. On the printer
driver's [Detailed Settings]
tab, click [Print Quality] in
"Menu:", and then select
[Raster] in the "Vector/
Raster:" list. In some cases,
it will take a long time to
complete a print job.
• Install the optional SDRAM
module. For details about
installing SDRAM module,
contact your service
representative.
"Memory Retrieval Error" A memory allocation error
occurred.
Turn off the main power switch
and then back on again. If the
message appears again,
replace the SDRAM. For details
about replacing SDRAM,
contact your service
representative.
"No response from the server.
Authentication has failed."
A timeout occurred while
connecting to the server for
LDAP Authentication or
Windows Authentication.
Check the status of the server.
3. Troubleshooting
94

Ricoh SP 4510 DN Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Memory	512 MB
Monthly Duty Cycle	150, 000 pages
Maximum Paper Size	A4
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal, Executive
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	600 sheets (1 x 500-sheet tray + 100-sheet bypass tray)