Message Cause Solution
"Print overrun." Images were discarded while
printing.
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
"Printing privileges have not
been set for this document."
The PDF document you have
tried to print has no privileges to
print.
Contact the owner of the
document.
"Receiving data failed." Data reception was aborted. Resend the data.
"The selected paper size is not
supported. This job has been
cancelled."
Job Reset is automatically
performed if the specified paper
size is incorrect.
Specify the correct paper size,
and then print the file again.
"Sending data failed." The printer received a command
to stop transmission from the
printer driver.
Check that the computer is
working correctly.
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."
The hard disk became full after
a file was stored.
Reduce the file size to be sent.
"The selected paper type is not
supported. This job has been
cancelled."
Job Reset is automatically
performed if the specified paper
type is incorrect.
Specify the correct paper type,
and then print the file again.
"Unauthd. Copy Preventn. Error" The [Enter User Text:] field on
the [Unauthorized Copy
Prevention for Pattern Details]
screen is blank.
PCL 6/PostScript 3
On the printer driver's
[Detailed Settings] tab,
click [Effects] in "Menu:".
Select [Unauthorized
Copy Prevention], and
then click [Details] to
display [Unauthorized
Copy Prevention for
Pattern Details]. Enter text
in [Enter User Text:].
When Messages Are Displayed
95
To Next Page
Loading...
Need help?
General
