3. Squeeze the clip on the side paper guide and slide it to match the paper size.
4. Squeeze the end guide and slide it inward to match the standard size.
5. When loading paper into tray 1, slide the two switches at the bottom of the tray
according to the thickness of the paper.
If the paper is 164 g/m
2
(44 lb.) or thicker, slide both switches into the rear (thick) position. If the
paper is lighter than 163 g/m
2
(43 lb.), slide both switches into the forward (thin) position.
2. Loading Paper
28
To Next Page
Loading...
