6. Set the paper straight down on the paper source tray with its printing side facing up.
Make sure paper is not stacked higher than the upper limit (upper line) marked inside the tray.
Do not load the paper from a diagonally downward direction as shown in the figure below. Doing
so may cause the printer to malfunction.
7. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively may cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
Loading Paper into Paper Trays
29
To Next Page
Loading...
