1.Detailed Descriptions
6
No. Part Description
Sensor
19 Press Roller Motor Drives rhe press rollers at the entrance of the trim positioning unit.
20 Press Roller HP
Sensor
Detects the home position of the pressure roller.
21 Stopper Sensor Detects when the booklet is near the stopper.
No. Part Description
22 Main Board Circuit board controlling the entire trimmer.
23 PSU Converts alternating current to direct current, and sends current of the specified
voltage to the main board.
24 Breaker
Switch
Turns ON/ OFF the power supply. Also shuts off the supply of voltage when a
leakage occurs.
To Next Page
