16
You can set the functions for shooting movies and still images. Some functions may not be available or may not function fully
depending on the selected [Rec. Mode].
s List of shooting settings
Item Details Default setting
Image Effect Modes You can change image enhancements, such as tone, and shoot. n (Bright)
EV Compensation You can adjust the brightness of the whole image being shot. 5 (±0.0)
White Balance
You can match the lighting conditions during shooting and adjust the
color.
s (Auto)
AE Metering
You can set the area of the screen where the brightness is metered to
determine the exposure.
a (Multi-segment
metering)
Sensitivity You can set the ISO sensitivity. k (Auto)
Angle of View You can set the angle of view for shooting. b (Wide)
LCD Orientation
You can set the orientation of the camera depending on its alignment
when it is mounted.
1 (0°)
Recorded Pixels You can set the recorded pixels for still images. n (3264 x 2448)
Recorded Pixels (Movie)
You can set the recorded pixels (combination of number of pixels and
frame rate) for movies.
d (3840 x 2160)
Quality Level (Movie) You can set the quality level of the movie. Y (Fine)
Movie SR You can set whether or not to use shake reduction for movies. r (Off)
Wind Suppression
You can set whether or not to reduce the sound of wind while shooting
movies.
X (On)
To Next Page
Loading...
