Ricoh WG-M2 - Preparing the Camera; Setting Communication Devices (for Android)

23
1 Press and hold the
button in shooting
mode and enable the
wireless LAN (Wi-Fi).
After the waiting for
connection screen appears,
the Wi-Fi function is
enabled.
1 Enable the wireless LAN (Wi-Fi) function on the
communication device.
2 Start Image Sync on the communication device.
The NFC connection screen appears on the communication
device.
3 Tap [Choose a Network].
The [Choose a Network] screen
appears on the communication
device.
t Memo
• For details on how to use Image
Sync, refer to the Operating Manual
(PDF). (p.39)
4 Tap [RICOH_XXXXX] on
the [Network List].
The [Enter Password] screen
appears.
5 Enter the password, and
tap [Connect].
The camera is connected to the
communication device and the
list of images appears on the
Image Sync screen.
t Memo
• To check the default password, refer to the Operating Manual
(PDF). (p.39)
Preparing the camera
Setting communication devices (for Android)
SSID
RICOH _
0
Password