Ricoh WG-M2 - Shooting Movies and Still Images; Playing Back Movies and Still Images

20
Select the shooting mode according to the subject or scene and
shoot movies or still images.
t Memo
• Pressing the button in any shooting mode brings you
back to the shooting screen if the camera enters [Power
Saving] mode and the LCD screen is turned off.
• Attach the supplied underwater lens protector (O-LP1632)
when shooting underwater still images. (p.9)
1 Set the shooting
mode. (p.18)
The shooting screen
appears.
2 Press the button to shoot movies or still
images.
Press the button again to finish recording.
1 Press the button on the shooting screen.
This changes the screen to playback mode and the last still
image or movie shot is displayed.
2 Press the button
or the button.
Select an image
saved on either the
memory card or the
internal memory to
display it.
Press the button to
start the movie playback.
The operations guide is displayed on the screen during
movie playback.
Pressing the button brings you back to the shooting
screen.
u Caution
• The [Power Saving] function is not available in playback
mode.
t Memo
• [No image] is displayed on the screen if there are no movies
or still images saved on the internal memory or the memory
card.
Shooting movies and still images
00:01
When shooting movies
Playing back movies and still
images
00:00:47
00:00:47
00:00:47
2 /
1234
1234
1/ 1234
Operations guide
During movie playback