EasyManua.ls Logo

Ricoh WG-M2 - Shooting still images with burst shooting

Ricoh WG-M2
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
You can set the shooting mode for movies and still images.
1 Press the button on the shooting screen.
The settings menu is displayed.
2 Press the button or
the button. Select
T [Rec. Mode] and
press the button.
The [Rec. Mode] screen
appears.
See “List of shooting
modes” (p.15) for the
shooting modes that can be selected.
3 Press the button or
the button. Select
the shooting mode
and press the
button.
This brings you back to the
shooting screen.
If you selected [Time-Lapse
Movie] or [Extended Movie
Recording], proceed to step
4.
4 For [Time-Lapse Movie], select the speed. For
[Extended Movie Recording], select the
recording time. Press the button.
t Memo
The current settings for the [Rec. Mode] are saved even when
the camera is turned off.
By pressing the button while doing settings, you return to
the previous screen with the existing settings.
The available recording time for [Extended Movie Recording]
differs depending on the [Recorded Pixels (Movie)] (p.16).
For details, refer to the Operating Manual (PDF). (p.39)
Shooting mode settings
Rec. Mode
OK
Movie
OK
Shooting mode Icon Details
Time-Lapse Movie
c
You can shoot movies at 30
times the speed.
C
You can shoot movies at 60
times the speed.
B
You can shoot movies at
150 times the speed.
Extended Movie
Recording
E
Set the recording time to 5
minutes.
D
Set the recording time to 10
minutes.
e
Set the recording time to 25
minutes.

Other manuals for Ricoh WG-M2

Related product manuals