RiCOMA (Shenzhen) Co.,Ltd
A Passion for Excellence Visit us at
Add.: Building B, ShenChangGang Science Park, Jinlong Road 1, Baolong Industrial Town,
Longgang District, Shenzhen, P.R.C
Tel.:+86-0755-25857576 Fax: +86-0755-25857773 - 11 -
www.ricoma.cn
jumps, with default value 80, meaning 80% of original
speed, and the setting range 60—90, meaning
60%--90%；
Stop frame of moving: It means if to stop working when receiving the stop
instruction, with default status Yes；
Number of needle: The number of needles had been set according to actual
needle numbers of the machine;
Sequins needle pos: It means the position of sequins needle, i.e. the needle used
for sequins embroidery, with left and right needle poles,
and the default one Left Needle pole;
Sequins speed limit: It means the maximum embroidery speed of sequins,
with default value 500;
Boring needle pos: With default value 0;
Cord needle position: With default value 0;
Cord embroidery speed limit: It means the maximum speed of principal axis
during cord embroidery, with default value 300 and
setting range 300-600;
Cycle embroidery: Cycle embroidery means if automatically to proceed with
embroidery after the completion of pattern plates, with
default status No；
To Next Page
Loading...
