RIEJU Nuuk User Manual

Rieju - Nuuk
Workshop Manual

RIEJU Nuuk Specifications

General

Brand	RIEJU
Model	Nuuk
Category	Diagnostic Equipment
Language	English

Summary

Diagnosis Software

Software Installation Process

Step-by-step guide for installing diagnostic software.

Software Appearance and Description

Connect the Bosch Diagnostics Tool

Instructions for physically connecting the diagnostic tool to the vehicle.

Troubleshooting Software Connection Issues

Addresses common errors when the diagnostic software fails to connect.

Components Information

Troubleshooting

Motorbike Does Not Turn ON

Steps to diagnose and resolve startup failures.

Dashboard Not ON, Battery Charged

Dashboard Not ON, Impossible to Connect

Diagnose when the dashboard is off and diagnostic connection fails.

Power Batteries Don't Charge

Steps to fix issues where power batteries fail to charge.

12V Battery Discharging, ERROR Appears

Resolve 12V battery discharge and dashboard error codes.

Low KM Range and Power

Motorbike Run But Don't Charge, ERROR Appears

Troubleshoot when the bike runs but doesn't charge, displaying errors.

Motorbike Doesn't Run, Dashboard Error ON

Fix motorbike operational failures indicated by dashboard error lights.

Dashboard ON, Cannot Start, Motorbike Doesn't Charge

Resolve startup and charging issues when the dashboard is active.

Check CAN Drive Unit and DC/DC Connector

Controller/Battery Errors, Check Power Wires

Diagnose controller/battery errors by inspecting power wire connections.

Dashboard ON, Cannot Start/Charge, Drive Unit Not Connected

Dashboard ON, Error Light ON, Motorbike Not Running/Charging

Dashboard ON, Cannot Connect to Software

Dashboard ON, No Error, Motorbike Charges

Dashboard Error ON, Motorbike Doesn't Run

Motorbike Runs and Charges, Main Lights Not Working

Turn Lights Not Working