28
Fail: Motorbike run correct for a time but battery of 12V is discharging, ERROR
appears on the dashboard and the power batteries don’t charge.
1. Check battery voltage when we turn the key to ON position voltage of the
battery don’t change to charging voltage level (around 13,7V)
2. Connect diagnosis software to the bike. If Error 0xAF appears, check
fuse 40A 58V.
Check fuse 40A 58V:
Fuse is placed up of the electrical motor. Remove the motor cover, both sides,
removing 7 screws.
WARNING: You must use one fuse 40A/58V.
(Rieju part number: 0/000.910.3503)
If fuse is NOK replace it.
To Next Page
Loading...