RIEJU Nuuk - Default Chapter; Table of Contents

Con
tents
4
Introduction 7
 Rules 8
 Safety rules 8
 Maintenance rules 9
 Components 10
o
Battery 10
o
Controller 11
o
Display 11
o
Drive unit 12
o
Charger 12
Diagnosis Software 13
 Software Installation Process
14
 Software appearance and description
15
 Connect the Bosch diagnostics tool
16
 Software don’t connect
17
o
Error: CAN fail 17
o
Error: VCU no detected 17
 Components information
18
Troubleshooting 19
 Motorbike don’t turn ON 20
Fail: We turn the key but the dashboard doesn’t turn ON, always is
black. Battery doesn’t charge.
20
Check switch-on-relay 20
Checks fuse 15A 21
Checks 12V battery 21
Fail: We turn the key but the dashboard doesn’t turn ON, always is
black. Battery charge.
23
Checks big dashboard connector 23
Fail: We turn the key but the dashboard doesn’t turn ON, always is
black. Battery don’t charge and is impossible connect with the
diagnose software
24
Check VCU C1 connector 24
 Power batteries don’t charge 25
Fail: Motorbike run correct, any error appears on the dashboard
but the power batteries don’t charge.
25
Check charger power connexions 25
Check charger CAN connexions 26
Check side stand 27
Check side stand switch 27
Fail: Motorbike run correct for a time but battery of 12V is
discharging, ERROR appears on the dashboard and the power
batteries don’t charge.
28