36
9. If voltages are NOK contact your support partner.
If on the diagnosis software Errors appears on controller and battery check
power wires of driver unit.
System shows the following errors:
0x27 : Diagnostics information fault, Deleted after T15 reset if fault is
inactive,
0xAF : 48V battery fault, Deleted after T15 reset if fault is inactive,
0x2F : Precharge fault, Deleted after T15 reset if fault is inactive,
Check power wires of driver unit:
Power wires are placed up of the electrical motor. Remove the motor cover,
both sides, removing 7 screws.
Checks that the wires don’t are placed in opposite way.
To Next Page
Loading...