32
Motorbike don’t run
Fail: We turn the key the dashboard is ON, but the motorbike doesn’t run.
Dashboard error light is ON. If we put the bike to charge, charge led flashes but
really the system doesn’t charge.
Connect diagnosis software to the bike. If Error 0xAF appears and any
component is affected, check fuse 7,5A 58V.
Check 40A 58V:
Fuse is placed up of the electrical motor. Remove the motor cover, both sides,
removing 7 screws.
WARNING: You must use one fuse 7,5A/58V.
(Rieju part number: 0/000.910.3502)
If fuse is NOK replace it.
To Next Page
Loading...