Riello 908T4 - Parameters Without Index, Without Direct Display

45
20160576
GB
Calibration and operation
Alternative 2:
Press “i/reset” to go back to the modification mode.
The set value will be adopted.
Note:
To detect display errors, the value appears shifted by one posi-
tion to the right.
Display: Value 3.822
6.8.2 Parameters without index, without direct
display
Example of parameter 224 (air pressure switch specified
time) on the Parameters level
Press for the specified time for the air pressure signal.
Display: Parameter 224: blinks, characters ._._ do not.
Press “i/reset” for the modification mode.
Display: 48.510.
Press or to change the time previously set by one posi-
tion to the left.
Display: The specified time 48.510 blinks.
Note
To detect display errors, the value appears shifted by one posi-
tion to the left.
Fig. 127
Adopt the value!
S9063
/
reset
P
Vh
mi n
s%
Fig. 128
S9142
S9117
ESC
Fig. 129
P
V
h
mi n
s
%
Fig. 130
S9143
Fig. 131
S9062
On to next parameter
S9058
Goes back to the previous
parameter
P
Vh
mi n
s%
Fig. 132
S9144
S9062
Fig. 133
S9063
/
reset
P
Vh
mi n
s%
Fig. 134
S9145
P
Vhmins%
Fig. 135
S9146