EXTERNAL TEMPERATURE PROBE
This NON ISOLATED input may be used to measure the temperature inside a remote Battery Box.
The special kit provided by the manufacturers must be used: any methods not conforming to specifications may
cause faults or breakdowns in the equipment.
To install, connect the cable included in the special kit to the "EXT BATTERY TEMP PROBE" connector (see "View of the UPS
Connections" ref. 3).
After installation, enable the outdoor temperature measuring function using the configuration software.
REMOTE PANEL (OPTIONAL)
The remote panel enables the remote monitoring of the UPS and gives a real time detailed summary of the machine status. The
device ensures that the operator can control the electrical values of the mains power, outputs, batteries, etc. and locate any
alarm conditions.
For further information regarding the connection and use of this device, please refer to its apposite manual.
To Next Page
Loading...
