Riello MSM 10 - Software Management; Monitoring and Control Software; UPS Configuration Software

SOFTWARE
MONITORING AND CONTROL SOFTWARE
The PowerShield
3
software ensures an effective and user-friendly management of the UPS, displaying all the most important
items of information such as the input voltage, load applied and battery capacity.
It can also automatically perform shutdown operations, send e-mails, sms and network messages when specific user-selected
events occur.
Installation operations:
 Connect the RS232 communication port of the UPS to a COM communication port of the PC via the serial cable
provided* or connect the USB port of the UPS to a USB port of the PC using a standard USB cable *.
 Download the software from www.riello-ups.com, selecting the desired operating system.
 Follow the installation program instructions.
 For more detailed information about installation and use, refer to the software manual which can be downloaded from
our website www.riello-ups.com.
CONFIGURATION SOFTWARE
Using special software, it is possible to configure the most important UPS parameters.
For a list of possible configurations, refer to the UPS configuration paragraph.
* We recommend the use of a cable no longer than 3 metres.