RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
Figure 2- 74
Table 2- 43 The Task Menu Description
Use the direction key to select which channel
the task will use.
Select the measure function.
Select the proper range options.
Select the digits reading precision.
Set the number of the sampling for the task.
Store the changing and return.
Delete or edit the setting task if needed.
Figure 2- 75
A new task would be added at the end of the task list. During editing and deleting,
only the chosen (highlighted) task is in effect.
Press Done, choose Save or Apply to set the needed task.
Figure 2- 76
Press Save, and use the up/down key to choose the location for storing the file.
To Next Page
Loading...
Need help?
General
