RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
General Inspection
Inspect a new DM3000 Digital Multimeter with the following steps:
1. Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents of the
shipment have been checked for completeness and the instrument has been checked
mechanically and electrically.
2. Check the accessories.
Accessories supplied with the instrument are listed in "Accessories" at Appendix B of
this guide.
If the contents are incomplete or damaged, please notify the RIGOL Sales
Representative.
3. Inspect the instrument.
In case of any damage, or defect, or failure, notify the RIGOL Sales Representative.
If the shipping container is damaged, or the protective material shows signs of stress,
notify the carrier as well as your RIGOL sales office. Keep the shipping materials for
the carrier‟s inspection.
RIGOL offices will arrange reparation or replacement at RIGOL‟s option without
waiting for claim settlement.
To Next Page
Loading...
Need help?
General
