RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
1. Connect the test lead
How to connect the lead in different measurements.
2. Measure
How many functions can get when using Meas.
3. Math measure
How to operate the math measure function when using Meas.
4. Sensor measure
How to operate the sensor measure.
5. To set the Data Log
How to set the content when using Datalog.
6. Storage and read
How to store and read the data/parameter/ sensors/scan task.
7. To set the Utility
The method of setting the Utility.
8. I/O interface
Use method of setting the I/O interface.
9. Help on line
Press and hold the key for more than 3 seconds at any operation interface to obtain
Help information of the key.
10. To change the electric power fuse
How to change the electric power fuse.
11. Technique support
Getting the technique support.
To Next Page
Loading...
