Rigol DM3000 Series User Manual

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
3-12
c) Press Unit  ℃, select the unit of the sensor: ℃.
Figure 3- 20
When finish a proper input, press to save all the changes and back to a higher
level menu.
(3). Press Define button, the interface shows below:
Figure 3- 21
(4). Press Add button, input the first group of reference value: 111.480Ω,
29.5℃.
(5). In Define interface, Press SEG  Arith  Line, Select the arithmetic: Line.
Figure 3- 22
When finishing this group of reference value, press Done button, save all changes,
and continue to input other values.

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English