RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
(To know the specific setting methods of the Null value setting, please refer to
Chapter 2 “To Set Up Measurement Parameters”, Null computing)
6. Lead test leads into circuit and start to measure.
Figure 1- 10 AC Voltage Measurement
7. Use history function.
Press History, the menu shows as below:
Figure 1- 11 The History Data
Use the history function to review or save the data that has acquired by the current
measurement function. The data can be display “Info” (information), “List” and
“HistoG” formats.
Press Update softkey to update the History data.
Press Save softkey to save data.
To Next Page
Loading...
