RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
Table 2- 36 Data Log Menu Description
To set the sample rate with 13 values from
1/10m to 50k/s.
To set the sample manner to be Trig or delay.
To set the data measurement stop manner to
be timer or counter.
Save all the changes, back to a higher level
menu.
Press Log Sa/s, the interface shows below.
Figure 2- 57 The Data Log Rate Setting Interface
Press Log Start, the interface shows below.
Figure 2- 58 The Data Log Start Manner Setting Interface
To Next Page
Loading...
