5. At present, the m.mir file contains 2 system configuration files which are “Set1”
and “Set2” and 2 sensor configuration files which are “a” and “b”.
(1) You can delete the configuration files in DM3058/DM3058E and read (Read)
the m.mir file again to re-release the files to the corresponding location inside
DM3058/DM3058E.
(2) Also, you can “clone” the configuration stored to other DM3058/DM3058E via
USB flash device.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
