Rigol DM3058E

RIGOL
User’s Guide for DM3058/DM3058E
2-72
Test/Cal
Press  Cal, enter the following interface:
Figure 2-90 Inspective Interface
Table 2-36 Inspection Manu
Function Manue Settings Explanation
Info
Check relative information about the
instrument
PSW Input Adjust password
SecrOn Open or Close Safety Lock
Cal
Calibrate every range about the
instrument
Save all the changes and go back to
last Manu
NOTES:
 Safety Lock is open before inputting password.
 After input right password, Safety Lock will be open automatically.
 This instrument has been calibrated before leaving factory. To perform a
calibration, please contact with the Technical Support Department of RIGOL for
help.
w ww. . com
information@itm.com1.800.561.8187