To Measure AC Voltage
The Multimeter enables to measure AC Voltage up to 750V. For the details about
how to connect and measure please refer to the following steps.
Operating Steps:
1. Press
to enter into the AC Voltage Measurement interface.
Figure 2-7 AC Voltage Measurement Interface
2. Connect the red lead to terminal Input-HI and black lead to terminal Input-LO
as the figure below.
Figure 2-8 Sketch map for connecting
3. Choose a proper Voltage range according to the measured circuit
Table 2-2 Measurement Characteristics of AC Voltage
Ranges* 200mV, 2V, 20V, 200V, 750V
Input Protection 750Vrms on all ranges (HI terminal)
Configurable
Parameters
Range, REL
To Next Page
Loading...
