Rigol DS1000CA Series - Page 94

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-82
The range of <value> is 4~194.
Returned Format:
Query returns the set value of <value>.
Example:
:CURS:MANU:CURBY 100 Set position of BY as 100
:CURS:MANU:CURBY? Query returns 100
8. :CURSor:TRACk:SOURceA
Command Format:
:CURSor:TRACk:SOURceA <source>
:CURSor:TRACk:SOURceA?
Function Explanation:
This command is used to set and query the measure channel tracked by
cursor A in track mode. The options of <source> are “CHANnel1”, “CHANnel2”,
“MATH” or “NONE”.
Returned Format:
Query returns CHANnel1, CHANnel2, MATH or NONE.
Example:
:CURS:TRAC:SOURA CHAN1 Set channel tracked by cursor A as “CHANnel1”
:CURS:TRAC:SOURA? Query returns CHANnel1
9. :CURSor:TRACk:SOURceB
Command Format:
:CURSor:TRACk:SOURceB <source>
:CURSor:TRACk:SOURceB?
Function Explanation:
This command is used to set and query the measure channel tracked by
cursor B in track mode. The options of <source> are “CHANnel1”, “CHANnel2”,