9. MC3648 (4×8 Matrix Switch)：
4×8 two-wire matrix switch.
MC3648 is used to connect multiple devices to multiple points on the device
under test. You can connect the rows and columns of multiple matrix switches to
form relatively larger matrix (such as 8×8 and 4×16, the number of crosspoints
cannot exceed 160).
32 two-wire cross points which can connect any combination of inputs and
outputs at the same time. For the specifications of this module, please refer to
the User’s Guide or Data Sheet of this product.
10. MC3724 (Dual 4-Channel RF Multiplexers)：
Dual 4-channel RF multiplexer.
MC3724 consists of two independent 4-to-1 multiplexers and can switch high
frequency signal or pulse signal. For the specifications of this module, please
refer to the User’s Guide or Data Sheet of this product.
To Next Page
Loading...
