Chapter 14 Store and Recall RIGOL
MSO1000Z/DS1000Z User’s Guide 14-9
Chinese Input Method
For example, create a file or folder with the name “文件名”.
1. Press Keyboard.
1) Use to select Chinese input method “中”.
Note: Chinese is added in the menu items at the right of the screen.
2) Use to input the pinyin “wen”. If the input is wrong, press Delete to
delete the pinyin input. After “wen” is input, a series of Chinese characters
appear in the “Chinese Chraracter Selecting Area”.
3) Press Chinese and use to select and input “文”.
4) Use the same method to input “件” and “名”.
2. During the name input, you can press Name to select the “Name Input Area”
and then press Delete to delete the Chinese characters at the left of the cursor
one by one.
3. After finishing the input, press OK and the oscilloscope will create a folder or a
specified type of file with this name under the current directory.
Pinyin Input Area Chinese Character Selecting Area Input Method Switch
Name Input Area Keyboard Upper-lower Case Switch
To Next Page
Loading...
