5. Usage Instrucions 5-6. Checking the gas concentration, alarm setpoints, etc. (display mode)
53 / 79
5-6. Checking the gas concentration, alarm setpoints, etc. (display mode)
Check measurement results.
Switch to display mode to check items like maximum concentration of gas detected, alarm setpoints, date and time,
and temperature. You can also adjust the buzzer volume.
5-6-1. Procedure for displaying display mode
1 Press the POWER/MODE button in
measurement mode.
The buzzer blips once, and the product switches to
display mode.
2 Press the POWER/MODE button to cycle
through the items displayed.
Pressing the POWER/MODE button cycles through
the displayed items.
Press the POWER/MODE button in the buzzer
volume setting screen to end display mode and
return to measurement mode.
Display example:
With date and time
display selected
To Next Page
Loading...
Need help?
General
