Riken Keiki 04 Series User Manual

6. User Mode Settings 6-2. User mode setting items
63 / 79
6-2. User mode setting items
The following items can be set in user mode:
Item LCD display Details
Bump test
(BUMP)
Perform a bump test (function check).
The bump test is a test for checking whether the readings are within the
acceptable range by introducing a calibration gas.
For information on the bump test procedure, see ‘7-3. Performing bump
tests’ in the Technical Manual.
Calibration
(GAS CAL)
Perform air calibration and AUTO calibration.
For information on the calibration procedure, see ‘7-2. Performing
calibration’ in the Technical Manual.
Calibration expiration
setting (CAL SET)
Toggle the calibration expiration ON/OFF for AUTO calibration, set the
number of days for calibration expiration, and set the operation after
calibration date expires.
*Settings available on export models only
Bump test expiration
setting
(BUMP.SET)
Set the various conditions for bump testing, toggle the bump test
expiration ON/OFF, set the bump test expiration date interval, and set
the behavior after bump test expiration.

Riken Keiki 04 Series Specifications

General

Brand	Riken Keiki
Model	04 Series
Category	Measuring Instruments
Language	English