2.6.4 Advancing the Current “Auto Program”
Period
You may wish to skip to the next Period, e.g. advance from
“Wake” to “Leave”.
1. With the unit ON and in “Auto Program”, press Key “2” to advance
the Period
2. Key “2”, normally the “Adv Period” Key, has now become the
“Cancel Adv Period” Key. Press this Key to return to the normal
program
3. To advance the Period of another zone, press Key “3” until the
desired zone is displayed in the top right hand corner of the LCD
screen and repeat step 1
Note: The Networker will revert to “Auto Program” after the
current period ends.
To Next Page
Loading...