EasyManua.ls Logo

Rinnai brivis ZonePlus - Default Chapter; Introduction; Application

Rinnai brivis ZonePlus
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
i
Introduction
Congratulations on purchasing a ZonePlus Climate Control System.
ZonePlus brings the possibility of total indoor climate control. It allows
you to optimize the performance of your Ducted Gas Heater or Dual
Comfort System through customized comfort control.
Your specialist Rinnai Dealer has divided your home into zones that can
be operated and controlled separately. The exact configuration of your
ZonePlus system will determine the programming features that are
enabled, as well as the number of zones that can be heated (or cooled)
simultaneously. ZonePlus may be operated manually, or you can
program your comfort schedule and let the system automatically do the
rest.
Please take the time to review this guide and enjoy the benefits of your
ZonePlus Climate Control System.
Specifications subject to change without notice.
© Rinnai Australia Pty Ltd 2018
Application
ZonePlus may be used on the following Ducted Systems:
StarPro Ducted Gas Heaters produced after 20 May 2013 (serial
number greater than 995000)
Dual Comfort Systems StarPro Heaters and ICE Refrigerated
Cooling)
StarPro Ducted Gas Heaters and Evaporative Cooling
Zoning is not available during Evaporative Cooling mode
The NC-6 Master Controller, or any other ZonePlus NC-6, where
fitted, will operate a Evaporative cooler with all normal features and
functionality
Note: ZonePlus systems should only be installed by
authorised Rinnai Dealers who have successfully completed
the ZonePlus Training Module.
Note: Your Rinnai Dealer has specified your ZonePlus System
Configuration Summary in Table 2.