ProSYS User's Manual 25
¾ To quick arm a group:
) Press the Function key corresponding to the group(s) you want to arm.
The selected group(s) is armed.
Force Arming
Force arming arms the system regardless of open zones. Your installer
must enable this option.
WARNING:
Force arming the system results in leaving partition(s) unsecured.
Wireless Button Arming
The system can be armed using a button on a wireless button key. Your
installer programs this option. Refer to the instructions supplied with your 4-
button key for more information.
Proximity Tag Arming
If your system is appropriately equipped, it can be armed using a proximity
tag. Your installer programs this option.
Keyswitch Arming
If your system is equipped with a special keyswitch, it can, with the twist of
a key, be toggled through Arm (Away) and Disarm modes.
Access Control Arming
If your system is equipped with RISCO Group's Access Control, you can
arm and disarm the system from the Access Control reader. Refer to the
Access Control User's Manual for more information.
To Next Page
Loading...
